How to Perform a Windshield Repair And Replacement?

How to Perform a Windshield Repair And Replacement?

If you want to keep your car safe, make sure the windshield of your vehicle is strong enough. The windshield helps ensure the integrity of your car. However, with the passage of time, the windshield fights with harsh weather and other elements. At times, windshields break. If this is the case with you, we suggest that you get it replaced or repaired.

Types of Car Windshield Cracks

These cracks are of many types. Based on the objects that hit the car, given below are the most common types.

Chip: When your windshield comes into contact with a small object or crack, the glass may lose a tiny chip or piece. With time, these chips tend to spread and evolve into a bigger area.

Edge crack: these cracks occur along the edge of the windshield. Often, when this area gets hit by something hard, meandering cracks occur. As a result, you need to replace the entire thing.

Stress crack: As the name suggests, this type of crack occurs when the glass experiences a lot of stress due to heat.

Should You hire a Professional or do it yourself?

Let’s answer this important question first. Usually, if the size of your windshield chip, break or crack is less than 6 inches, you can repair it. But if the crack is bigger than that, you may need to replace the whole windshield.

Ideally, you may want to fix the chip as soon as you can. If there is an underdeveloped chip, you can use an adhesive kit to fill in the chip. The idea is to remove the air from the inner layer and then seal the impact point.

Here is how a Professional Performs the Windshield Replacements

You need to go through multiple steps in order to remove and replace the car windshield. Therefore, it may not be a good idea to do the repair yourself. Given below is how a professional does the job.

Step #1: First off, you need to cover the interior and exterior to ensure it is protected from the tiny pieces of glass that may drop from the broken windshield.

Step #2: Now, you may want to remove the molding from the windshield perimeter.

Step #3: Grab the right tool to disconnect the windshield from the area where it’s welded to the car. All you need to do is use the tool to cut and separate it.

Step #4: At this step, you need to remove the glass by lifting it up and pushing out from the inside. You can get a helping hand to do so.

Step #5: Follow a couple of priming steps in order to ensure the frame sticks to the new windshield.

Step #6: Once installed, you can leave the windshield to set based on the manufacturer’s guidelines.


So, if your windshield is broken, make sure you get it fixed as soon as possible. However, if the problem is too serious, you may want to contact a technician to do the job for you.